A case of no-wind plinian fallout at Pululagua caldera (Ecuador): implications for models of clast dispersal     

Paolo Papale  Mauro Rosi 《Bulletin of Volcanology》1993,55(7):523-535

The caldera of Pululagua is an eruptive centre of the Northern Volcanic Zone of the South American volcanic arc, located about 15 km north of Quito, Ecuador. Activity leading to formation of the caldera occurred about 2450 b.p. as a series of volcanic episodes during which an estimated 5–6 km³ (DRE) of hornblende-bearing dacitic magma was erupted. A basal pumice-fall deposit covers more than 2.2x10⁴ km² with a volume of about 1.1 km³ and represents the principal and best-preserved plinian layer. Circular patterns of isopachs and pumice, lithic and Md isopleths of the Basal Fallout (BF) around the caldera indicate emplacement in wind-free conditions. Absence of wind is confirmed by an ubiquitous, normally graded, thin ash bed at the top of the lapilli layer which originated from slow settling of fines after cessation of the plinian column (co-plinian ash). The unusual atmospheric conditions during deposition make the BF deposit particularly suitable for the application and evaluation of pyroclast dispersal models. Application of the Carey and Sparks' (1986) model shows that whereas the 3.2-, 1.6-, and 0.8-cm lithic isopleths predict a model column height of about 36 km, the 6.4-cm isopleth yields and estimate of only 21 km. The 4.9- and 6.4-cm isopleths yield a column height of 28 km using the model of Wilson and Walker (1987). The two models give the same mass discharge rate of 2x10⁸ kg s^-1. A simple exponential decrease of thickness with distance, as proposed by Pyle (1989) for plinian falls, fits well with the BF. Exponential decrease of size with distance is followed by clasts less than about 3 cm, suggesting, in agreement with Wilson and Walker (1987), that only a small proportion of large clasts reach the top of the column. Variations with distance in clast distribution patterns imply that, in order to obtain column heights by clast dispersal models, the distribution should be known from both proximal and distal zones. Knowledge of only a few isopleths, irrespective of their distance from the vent, is not sufficient as seemed justified by the method of Pyle (1989).  相似文献   

Minutes of the work of the Meetings of the Section of Levelling     

Paolo Dore  O. Simonsen 《Journal of Geodesy》1959,33(2):1-5

  相似文献   

Certain particular solutions of the clairaut equation     

Paolo Lanzano 《Astrophysics and Space Science》1973,20(1):71-83

A study has been conducted to ascertain conditions on the density distribution within a fluid, rotating planet in order that the deformation of its outer shell be expressible in terms of the Bessel functions of the first kind and the Gaussian hypergeometric series.It has been established that (1) the density must be a solution to an ordinary differential equation of the Riccati type, and (2) two already considered density distributions are the only closed-form solutions of physical relevance.  相似文献   

Sopra una clorite (penninite) della valle del Dragone nell'appennino emiliano     

Paolo Gallitelli 《Mineralogy and Petrology》1954,4(1-4):283-287

Riassunto Viene descritta una penninite di Boccassuolo nell'Appennino modenese, e attraverso lo studio ottico, chimico, roentgenografico e termico differenziale ne vengono definite le proprietà caratteristiche. L'esame della curva termico differenziale e degli spettrogrammi Debye ottenuti da polvere di penninite scaldata fra 900° e 950° permette di stabilire che la trasformazione penninite-enstatite inizia già nell'ambito di temperatura compreso fra 910° e 940°.Con 1 figura.  相似文献   

Effects of trace metal and exposure to air on serotonin and dopamine levels in tissues of the mussel Perna perna   总被引：1，自引：0，他引：1  

Almeida EA  Bainy AC  Medeiros MH  Di Mascio P 《Marine pollution bulletin》2003,46(11):1485-1490

We evaluated levels of serotonin (5HT) and dopamine (DOPA) in muscle and digestive glands of the mussel, Perna perna, collected at different times of day; exposed to air for 24 h, followed by re-submersion; and after exposure to different metals. Mussels collected at different periods of day showed little oscillation in 5HT and DOPA levels. Mussels exposed to metals showed significant changes in 5HT and DOPA levels in digestive gland and muscle, as did mussels exposed to air. Our data suggest that analyses of 5HT and DOPA in tissues of mussels could serve as a tool to evaluate the presence and effects of heavy metal contamination in mussels. Care in data interpretation is required, however, since other environmental factors such as exposure of mussels to air (i.e. at low tides) can also cause changes in DOPA and 5HT levels. Additional research is necessary to separate such natural environmental effects from effects of contaminants.  相似文献   

Migrating sand waves     

Giovanni?BesioEmail author  Paolo?Blondeaux  Maurifio?Brocchini  Giovanna?Vittori 《Ocean Dynamics》2003,53(3):232-238

A simple mathematical model is described, which reproduces the major features of sand waves' appearance and growth and in particular predicts their migration speed. The model is based on the linear stability analysis of the flat configuration of the sea bottom subject to tidal currents. Attention is focused on the prediction of the complex growth rate that bottom perturbations undergo because of both oscillatory fluid motions and residual currents. While the real part _r of controls the amplification or decay of the amplitude of the bedforms, the imaginary part _i is related to their migration speed. Previous works on the migration of the sand waves (Németh etal. 2002) consider a forcing tide made up by the M2 constituent (oscillatory period equal to 12 h) plus the residual current Z0 and predict always a downcurrent migration of the bedforms. However, field cases exist of upcurrent-migrating sand waves (downcurrent/upcurrent-migrating sand waves mean bedforms moving in the direction of the steady residual tidal current or in the opposite direction, respectively). The inclusion of a tide constituent characterized by a period of 6 h (M4) is the main novelty of the present work, which allows for the prediction of the migration of sand waves against the residual current Z0. Indeed, the M4 tide constituent, as does also the residual current Z0, breaks the symmetry of the problem forced only by the M2 tide constituent, and induces sand-wave migration. The model proposed by Besio etal. (2003a) forms the basis for the present analysis. Previous works on the subject (Gerkema 2000; Hulscher 1996a,b; Komarova and Hulscher 2000) are thus improved by using a new solution procedure (Besio etal. 2003a) which allows for a more accurate evaluation of the growth rate for arbitrary values of the parameter r, which is the ratio between the horizontal tidal excursion and the perturbation wavelength. Responsible Editor: Jens Kappenberg  相似文献   

Improvement of Nakamura technique by singular spectrum analysis   总被引：1，自引：1，他引：1  

Roberto Carniel  Fausto Barazza  Paolo Pascolo 《Soil Dynamics and Earthquake Engineering》2006,26(1):55-63

In this work we investigate the application of the Singular Spectrum Analysis to improve Nakamura Technique. The SSA has a wide and multidisciplinary range of applications; it allows a time series to be decomposed into different components, e.g. the signal itself, as well as various noise components, which can be subsequently removed from the data. Removal of the minor component of the data can lead to significant improvements in the identification of the system. In this paper the use of SSA Technique allows to optimize the signal to noise ratio before computing the classical Nakamura spectral ratios. A number of typical applications are also presented.  相似文献   

Petrogenesis of tourmaline rocks associated with Fe-carbonate–graphite metapelite, metabasite and strata-bound polymetallic sulphide mineralisation, Peloritani Mountains, Sicily, Southern Italy     

Paolo Ferla  Carmelina Meli   《Lithos》2007,99(3-4):266-288

Tourmalinite and tourmaline-rich rocks associated with Fe-carbonate–graphite phyllite, strata-bound polymetallic sulphide deposits, metabasite and marble were studied, for information on the mechanism of tourmaline formation in the pre-Hercynian low-grade metamorphic sequence of the Mandanici Unit in the Peloritani Mountains of Sicily, southern Italy. The major and trace element compositions of the tourmaline rocks suggest the existence of a sedimentary protolith with pre-metamorphic black shale and bedded chert. Boron was interpreted to be accumulated in a restricted sedimentary basin, between platform carbonate formations, with abundant organic matter and Fe–Al–Ti-rich laterite–bauxite soil-derived clastic supply, under a continental volcano-tectonic extensional regime accompanied by a local convective hydrothermal system along faults. Petrographic, crystal–chemical and δ¹¹B isotopic data are compatible with a model of marine sediment dewatering at temperatures below 200 °C, which caused the removal of boron from clay. Metamorphism led to the development of tourmaline in an Al–Ti-rich environment, in equilibrium with other minerals such as ilmenite, albite and muscovite. The upper temperature of metamorphism (almost 375 °C), estimated on the basis of δ¹¹B, fits geothermometric results from Δ¹³C_{carbonate–graphite} on associated rocks. The estimated value of δ¹¹B in the tourmalinite protolith, − 7.5‰ , is also compatible with continental-derived Al-rich sediments.  相似文献   

Sensitivity analysis of seismic hazard for Western Liguria (North Western Italy): A first attempt towards the understanding and quantification of hazard uncertainty     

Simone Barani  Daniele Spallarossa  Paolo Bazzurro  Claudio Eva   《Tectonophysics》2007,435(1-4):13-35

The use of logic trees in probabilistic seismic hazard analyses often involves a large number of branches that reflect the uncertainty in the selection of different models and in the selection of the parameter values of each model. The sensitivity analysis, as proposed by Rabinowitz and Steinberg [Rabinowitz, N., Steinberg, D.M., 1991. Seismic hazard sensitivity analysis: a multi-parameter approach. Bull. Seismol. Soc. Am. 81, 796–817], is an efficient tool that allows the construction of logic trees focusing attention on the parameters that have greater impact on the hazard.In this paper the sensitivity analysis is performed in order to identify the parameters that have the largest influence on the Western Liguria (North Western Italy) seismic hazard. The analysis is conducted for six strategic sites following the multi-parameter approach developed by Rabinowitz and Steinberg [Rabinowitz, N., Steinberg, D.M., 1991. Seismic hazard sensitivity analysis: a multi-parameter approach. Bull. Seismol. Soc. Am. 81, 796–817] and accounts for both mean hazard values and hazard values corresponding to different percentiles (e.g., 16%-ile and 84%-ile). The results are assessed in terms of the expected PGA with a 10% probability of exceedance in 50 years for rock conditions and account for both the contribution from specific source zones using the Cornell approach [Cornell, C.A., 1968. Engineering seismic risk analysis. Bull. Seismol. Soc. Am. 58, 1583–1606] and the spatially smoothed seismicity [Frankel, A., 1995. Mapping seismic hazard in the Central and Eastern United States. Seismol. Res. Lett. 66, 8–21]. The influence of different procedures for calculating seismic hazard, seismic catalogues (epicentral parameters), source zone models, frequency–magnitude parameters, maximum earthquake magnitude values and attenuation relationships is considered. As a result, the sensitivity analysis allows us to identify the parameters with higher influence on the hazard. Only these parameters should be subjected to careful discussion or further research in order to reduce the uncertainty in the hazard while those with little or no effect can be excluded from subsequent logic-tree-based seismic hazard analyses.  相似文献   

Globalization: a geographical discourse     

Sergio Conti  Paolo Giaccaria 《GeoJournal》1998,45(1-2):17-25

  相似文献